feat:updateself

config/server/vless+reality.yaml

@@ -9,29 +9,20 @@
         "listen": "::",
         "listen_port": 443,
         "users":
-          [
+          [{ "name": "$NAME", "uuid": "$UUID", "flow": "xtls-rprx-vision" }],
-            {
-              "name": "AK-JP-100G",
-              "uuid": "singbox生成",
-              "flow": "xtls-rprx-vision",
-            },
-          ],
         "tls":
           {
             "enabled": true,
-            "server_name": "s0.awsstatic.com",
+            "server_name": "$SNI",
             "reality":
               {
                 "enabled": true,
-                "handshake":
+                "handshake": { "server": "$SNI", "server_port": 443 },
-                  { "server": "s0.awsstatic.com", "server_port": 443 },
+                "private_key": "$PRIVATE_KEY",
-                "private_key": "singbox生成",
+                "short_id": "$SHORT_ID",
-                "short_id": ["singbox生成"],
               },
           },
       },
     ],
-  "outbounds": [{ "type": "direct" }, { "type": "dns", "tag": "dns-out" }],
+  "outbounds": [{ "type": "direct" }],
-  "route": { "rules": [{ "protocol": "dns", "outbound": "dns-out" }] },
 }
-

script/singbox.sh

@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 # install_singbox.sh
+# 版本号
+SCRIPT_VERSION="1.12.1"
 set -euo pipefail
 
 # 颜色定义
@@ -93,23 +95,49 @@ install_singbox() {
   mkdir -p "$CONFIG_DIR"
   cat >"$CONFIG_DIR/config.json" <<EOF
 {
-  "log": {"level": "info"},
+  "log": {
-  "dns": {"servers": [{"address": "tls://8.8.8.8"}]},
+    "level": "info"
-  "inbounds": [{
+  },
+  "dns": {
+    "servers": [
+      {
+        "address": "tls://8.8.8.8"
+      }
+    ]
+  },
+  "inbounds": [
+    {
       "type": "vless",
       "tag": "VLESSReality",
       "listen": "::",
       "listen_port": 443,
-    "users": [{"name":"$NAME","uuid":"$UUID","flow":"xtls-rprx-vision"}],
+      "users": [
-    "tls": {"enabled":true,"server_name":"$SNI","reality":{
+        {
+          "name": "$NAME",
+          "uuid": "$UUID",
+          "flow": "xtls-rprx-vision"
+        }
+      ],
+      "tls": {
         "enabled": true,
-      "handshake": {"server":"$SNI","server_port":443},
+        "server_name": "$SNI",
+        "reality": {
+          "enabled": true,
+          "handshake": {
+            "server": "$SNI",
+            "server_port": 443
+          },
           "private_key": "$PRIVATE_KEY",
-      "short_id":["$SHORT_ID"]
+          "short_id": "$SHORT_ID"
-    }}
+        }
-  }],
+      }
-  "outbounds": [{"type":"direct"},{"type":"dns","tag":"dns-out"}],
+    }
-  "route": {"rules": [{"protocol":"dns","outbound":"dns-out"}]}
+  ],
+  "outbounds": [
+    {
+      "type": "direct"
+    }
+  ]
 }
 EOF
 
@@ -170,16 +198,57 @@ status_singbox() {
   fi
 }
 
-# 显示 VLESS Reality 链接
+# 显示 VLESS Reality 链接 + 二维码
 show_link() {
   printf "${CYAN}===== 您的 VLESS Reality 链接 =====${NC}\n"
-  [[ -f "$STATE_FILE" ]] || {
+
-    printf "${RED}未找到状态文件，请先安装。${NC}\n"
+  # 如果状态文件不存在，尝试从 config.json 读取并生成
+  if [[ ! -f "$STATE_FILE" ]]; then
+    if [[ -f "$CONFIG_DIR/config.json" ]]; then
+      NAME=$(grep -oP '"name"\s*:\s*"\K[^"]+' "$CONFIG_DIR/config.json")
+      UUID=$(grep -oP '"uuid"\s*:\s*"\K[^"]+' "$CONFIG_DIR/config.json")
+      SNI=$(grep -oP '"server_name"\s*:\s*"\K[^"]+' "$CONFIG_DIR/config.json")
+      PUB_KEY=$(grep -oP '"public_key"\s*:\s*"\K[^"]+' "$CONFIG_DIR/config.json")
+      SHORT_ID=$(grep -oP '"short_id"\s*:\s*"\K[^"]+' "$CONFIG_DIR/config.json")
+      FP="chrome"
+      SERVER_IP=$(curl -s https://ifconfig.me)
+      PORT=443
+      SPX="/"
+
+      # 保存新的 state.env
+      mkdir -p "$CONFIG_DIR"
+      cat >"$STATE_FILE" <<EOF
+NAME="$NAME"
+SNI="$SNI"
+UUID="$UUID"
+PUB_KEY="$PUB_KEY"
+SHORT_ID="$SHORT_ID"
+FP="$FP"
+SERVER_IP="$SERVER_IP"
+PORT="$PORT"
+SPX="$SPX"
+EOF
+    else
+      printf "${RED}未找到配置文件，请先安装。${NC}\n"
       return
-  }
+    fi
+  fi
+
+  # 读取 state.env
   source "$STATE_FILE"
   LINK="vless://${UUID}@${SERVER_IP}:${PORT}?security=reality&sni=${SNI}&fp=${FP}&pbk=${PUB_KEY}&sid=${SHORT_ID}&spx=${SPX}&type=tcp&flow=xtls-rprx-vision&encryption=none#${NAME}"
+
   printf "${GREEN}%s${NC}\n\n" "$LINK"
+
+  # 生成二维码
+  if command -v qrencode &>/dev/null; then
+    printf "${CYAN}===== 二维码 =====${NC}\n"
+    qrencode -t ANSIUTF8 "$LINK"
+    printf "\n"
+  else
+    printf "${YELLOW}未安装 qrencode，无法生成二维码。\n"
+    printf "安装方法：apt install qrencode 或 yum install qrencode${NC}\n"
+  fi
 }
 
 # 卸载 Sing-box
@@ -204,8 +273,34 @@ reinstall_singbox() {
   install_singbox
 }
 
+# 更新脚本自身
+update_self() {
+  local script_path="${BASH_SOURCE[0]}"
+  local tmp_file="/tmp/install_singbox.sh.tmp"
+
+  printf "${CYAN}===== 更新脚本自身 =====${NC}\n"
+  if command -v curl &>/dev/null; then
+    local url="https://raw.githubusercontent.com/Dichgrem/singbox-example/refs/heads/main/script/singbox.sh"
+    echo "从 $url 下载最新脚本..."
+    if curl -fsSL "$url" -o "$tmp_file"; then
+      echo "下载成功，准备替换本地脚本..."
+      chmod +x "$tmp_file"
+      mv "$tmp_file" "$script_path"
+      echo "脚本更新完成。"
+      echo "重启脚本..."
+      exec bash "$script_path"
+    else
+      echo "${RED}下载失败，无法更新脚本。${NC}"
+      rm -f "$tmp_file"
+    fi
+  else
+    echo "${RED}未安装 curl，无法自动更新脚本。${NC}"
+  fi
+}
+
 # 菜单主循环
 check_update
+printf "${BLUE}当前脚本版本：${SCRIPT_VERSION}${NC}\n"
 while true; do
   printf "${BOLD}${BLUE}请选择操作：${NC}\n"
   printf "  ${YELLOW}1)${NC} 安装 Sing-box 并生成配置\n"
@@ -215,7 +310,8 @@ while true; do
   printf "  ${YELLOW}5)${NC} 重新安装 Sing-box\n"
   printf "  ${YELLOW}6)${NC} 升级 Sing-box 二进制\n"
   printf "  ${YELLOW}7)${NC} 更换 SNI 域名\n"
-  printf "  ${YELLOW}8)${NC} 退出\n"
+  printf "  ${YELLOW}8)${NC} 更新脚本自身\n"
+  printf "  ${YELLOW}9)${NC} 退出\n"
   printf "${BOLD}输入数字 [1-8]: ${NC}"
   read -r choice
   case "$choice" in
@@ -226,7 +322,8 @@ while true; do
   5) reinstall_singbox ;;
   6) update_singbox ;;
   7) change_sni ;;
-  8)
+  8) update_self ;;
+  9)
     printf "${GREEN}退出。${NC}\n"
     exit 0
     ;;