chore:actions

.github/workflows/build.yml

@@ -30,15 +30,15 @@ on:
       config_path:
         description: "配置文件路径"
         required: true
-        default: "config/myconfig"
+        default: "config/x86_64_config"
         type: string
-      proxy_nikki:
+      proxy_passwall2:
-        description: "启用Nikki"
+        description: "启用Passwall2"
         required: false
         default: false
         type: boolean
-      proxy_passwall2:
+      proxy_luci_app_zzz:
-        description: "启用Passwall2"
+        description: "启用luci-app-zzz"
         required: false
         default: false
         type: boolean
@@ -52,10 +52,60 @@ on:
         required: false
         default: "0"
         type: string
+      cache_enabled:
+        description: "启用缓存加速编译"
+        required: false
+        default: true
+        type: boolean
+
+env:
+  CCACHE_DIR: ${{ github.workspace }}/wrt/.ccache
+  DL_DIR: ${{ github.workspace }}/wrt/dl
 
 jobs:
-  build:
+  validate:
+    name: 验证输入参数
     runs-on: ubuntu-latest
+    outputs:
+      is_valid: ${{ steps.validate.outputs.is_valid }}
+      config_exists: ${{ steps.validate.outputs.config_exists }}
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Validate inputs
+        id: validate
+        run: |
+          echo "🔍 验证输入参数..."
+          
+          # 验证 threads 参数
+          if [ -n "${{ inputs.threads }}" ]; then
+            if ! [[ "${{ inputs.threads }}" =~ ^[0-9]+$ ]]; then
+              echo "❌ threads 参数必须是数字"
+              echo "is_valid=false" >> "$GITHUB_OUTPUT"
+              exit 1
+            fi
+          fi
+          
+          # 验证配置文件是否存在
+          if [ -f "${{ inputs.config_path }}" ]; then
+            echo "config_exists=true" >> "$GITHUB_OUTPUT"
+            echo "✅ 配置文件存在：${{ inputs.config_path }}"
+          else
+            echo "config_exists=false" >> "$GITHUB_OUTPUT"
+            echo "❌ 配置文件不存在：${{ inputs.config_path }}"
+            echo "is_valid=false" >> "$GITHUB_OUTPUT"
+            exit 1
+          fi
+          
+          echo "is_valid=true" >> "$GITHUB_OUTPUT"
+          echo "✅ 所有输入参数验证通过"
+
+  build:
+    name: 编译固件
+    runs-on: ubuntu-latest
+    needs: validate
+    timeout-minutes: 360
 
     steps:
       - name: Checkout current repository
@@ -68,23 +118,52 @@ jobs:
             /usr/local/lib/android \
             /opt/ghc \
             /opt/az \
-            /opt/microsoft
+            /opt/microsoft \
+            /usr/local/share/boost \
+            /usr/share/swift \
+            /usr/local/lib/nodejs
           sudo apt-get clean
           sudo rm -rf /var/lib/apt/lists/*
           echo "📊 磁盘使用情况："
           df -h || true
 
+      - name: Setup ccache
+        uses: hendrikmuhs/ccache-action@v1.2
+        if: inputs.cache_enabled == true
+        with:
+          key: ${{ runner.os }}-wrt-ccache-${{ inputs.project }}-${{ inputs.version_type }}
+          max-size: 2G
+
+      - name: Cache downloads
+        uses: actions/cache@v4
+        if: inputs.cache_enabled == true
+        with:
+          path: ${{ env.DL_DIR }}
+          key: ${{ runner.os }}-wrt-dl-${{ inputs.project }}-${{ inputs.version_type }}-${{ hashFiles('**/*.config') }}
+          restore-keys: |
+            ${{ runner.os }}-wrt-dl-${{ inputs.project }}-${{ inputs.version_type }}-
+            ${{ runner.os }}-wrt-dl-${{ inputs.project }}-
+            ${{ runner.os }}-wrt-dl-
+
+      - name: Cache build directory
+        uses: actions/cache@v4
+        if: inputs.cache_enabled == true
+        with:
+          path: wrt/build_dir
+          key: ${{ runner.os }}-wrt-build-${{ inputs.project }}-${{ inputs.version_type }}-${{ hashFiles('**/*.config') }}
+          restore-keys: |
+            ${{ runner.os }}-wrt-build-${{ inputs.project }}-${{ inputs.version_type }}-
+            ${{ runner.os }}-wrt-build-${{ inputs.project }}-
+            ${{ runner.os }}-wrt-build-
+
       - name: Choose Wrt Version
         id: refinfo
         run: |
-          if [ "$VERSION_TYPE" = "snapshot" ]; then
+          if [ "${{ inputs.version_type }}" = "snapshot" ]; then
             echo "ref=master" >> "$GITHUB_OUTPUT"
           else
-            echo "ref=$TAG" >> "$GITHUB_OUTPUT"
+            echo "ref=${{ inputs.tag }}" >> "$GITHUB_OUTPUT"
           fi
-        env:
-          VERSION_TYPE: ${{ inputs.version_type }}
-          TAG: ${{ inputs.tag }}
 
       - name: Install dependencies
         run: |
@@ -99,7 +178,8 @@ jobs:
             libelf-dev libfuse-dev liblzma-dev libxml2-dev libyaml-dev \
             uuid-dev device-tree-compiler antlr3 gperf \
             time bc jq xxd swig upx-ucl ccache ecj fastjar imagemagick \
-            llvm linux-tools-common libbpf-dev linux-tools-$(uname -r)
+            llvm linux-tools-common libbpf-dev linux-tools-$(uname -r) \
+            u-boot-tools device-tree-compiler
 
       - name: Determine Git URL
         id: projectinfo
@@ -129,10 +209,9 @@ jobs:
       - name: Clone Wrt source
         run: |
           echo "📥 克隆 ${{ inputs.project }} 仓库"
-          git clone "${{ steps.projectinfo.outputs.url }}" wrt
+          git clone --depth 1 "${{ steps.projectinfo.outputs.url }}" -b "${{ steps.refinfo.outputs.ref }}" wrt || \
-          cd wrt
+          (git clone "${{ steps.projectinfo.outputs.url }}" wrt && cd wrt && git checkout "${{ steps.refinfo.outputs.ref }}")
-          echo "🔖 切换到版本：${{ steps.refinfo.outputs.ref }}"
+          echo "🔖 当前版本：$(cd wrt && git describe --tags --always || git rev-parse --short HEAD)"
-          git checkout "${{ steps.refinfo.outputs.ref }}"
 
       - name: Copy and Run diy.sh
         run: |
@@ -145,19 +224,19 @@ jobs:
       - name: Update and install feeds
         working-directory: wrt
         run: |
-          if [ "${{ github.event.inputs.proxy_nikki }}" == "true" ]; then
+          if [ "${{ inputs.proxy_luci_app_zzz }}" = "true" ]; then
-            echo "📦 添加 nikki feed"
+            echo "📦 添加 luci-app-zzz feed"
-            echo "src-git nikki https://github.com/nikkinikki-org/OpenWrt-nikki.git;main" >> "feeds.conf.default"
+            echo "src-git luci-app-zzz https://github.com/Dichgrem/luci-app-zzz.git" >> "feeds.conf.default"
           fi
 
-          if [ "${{ github.event.inputs.proxy_passwall2 }}" == "true" ]; then
+          if [ "${{ inputs.proxy_passwall2 }}" = "true" ]; then
             echo "📦 添加 passwall2 feed"
             echo "src-git passwall https://github.com/xiaorouji/openwrt-passwall2.git" >> "feeds.conf.default"
           fi
 
-          if [ "${{ github.event.inputs.proxy_luci_app_momo }}" == "true" ]; then
+          if [ "${{ inputs.proxy_luci_app_momo }}" = "true" ]; then
             echo "📦 添加 luci-app-momo feed"
-            echo "src-git momo https://github.com/nikkinikki-org/OpenWrt-momo.git;main" >> "feeds.conf.default"
+            echo "src-git momo https://github.com/nikkinikki-org/OpenWrt-momo.git" >> "feeds.conf.default"
           fi
 
           echo "📦 更新 feeds"
@@ -168,11 +247,6 @@ jobs:
       - name: Setup configuration
         run: |
           echo "📋 复制配置：${{ inputs.config_path }} → wrt/.config"
-          if [ ! -f "${{ inputs.config_path }}" ]; then
-            echo "❌ 找不到配置文件：${{ inputs.config_path }}"
-            exit 1
-          fi
-
           cp "${{ inputs.config_path }}" wrt/.config
 
           cd wrt
@@ -196,9 +270,14 @@ jobs:
         run: |
           echo "⬇️ 下载所有源码包（使用单线程 -j1 避免卡住）"
           set -o pipefail
+          START=$(date +%s)
           time make download -j1
+          END=$(date +%s)
+          DURATION=$((END - START))
+          echo "✅ 下载完成，耗时：${DURATION}秒"
 
       - name: Build Firmware
+        id: build
         working-directory: wrt
         run: |
           if [ "${{ inputs.threads }}" = "0" ] || [ -z "${{ inputs.threads }}" ]; then
@@ -209,7 +288,9 @@ jobs:
 
           echo "🚀 全量编译（并行 ${JOBS}）开始"
           START=$(date "+%Y-%m-%d %H:%M:%S")
+          START_TS=$(date +%s)
           echo "⏱️ 编译开始：${START}"
+          echo "jobs_count=${JOBS}" >> "$GITHUB_OUTPUT"
 
           set -o pipefail
 
@@ -227,31 +308,72 @@ jobs:
           fi
 
           END=$(date "+%Y-%m-%d %H:%M:%S")
+          END_TS=$(date +%s)
+          DURATION=$((END_TS - START_TS))
+          DURATION_H=$((DURATION / 3600))
+          DURATION_M=$(((DURATION % 3600) / 60))
+          DURATION_S=$((DURATION % 60))
+          
           echo "✅ 编译成功"
           echo "⏱️ 编译结束：${END}"
+          echo "⏱️ 总耗时：${DURATION_H}小时 ${DURATION_M}分钟 ${DURATION_S}秒"
+          echo "build_success=true" >> "$GITHUB_OUTPUT"
 
-      - name: list all target files
+      - name: Build statistics
+        if: steps.build.outputs.build_success == 'true'
         run: |
-          echo ">>> 打印 wrt/bin/targets 下所有文件："
+          echo "📊 编译统计信息："
+          echo "项目：${{ inputs.project }}"
+          echo "版本：${{ steps.refinfo.outputs.ref }}"
+          echo "编译线程：${{ steps.build.outputs.jobs_count }}"
+          echo "缓存状态：${{ inputs.cache_enabled }}"
+          echo ""
+          echo "固件文件列表："
           if [ -d wrt/bin/targets ]; then
-            find wrt/bin/targets -type f | sed 's/^/  - /'
+            find wrt/bin/targets -type f -exec ls -lh {} \; | awk '{print $9, $5}'
-          else
+            echo ""
-            echo "❗ wrt/bin/targets 目录不存在"
+            echo "总固件大小："
+            du -sh wrt/bin/targets
           fi
 
+      - name: Upload build log on failure
+        uses: actions/upload-artifact@v4
+        if: failure()
+        with:
+          name: ${{ inputs.project }}-build-log-error
+          path: wrt/world_debug.log
+          retention-days: 7
+          if-no-files-found: ignore
+
       - name: Upload build artifacts
         uses: actions/upload-artifact@v4
+        if: steps.build.outputs.build_success == 'true'
         with:
-          name: ${{ inputs.project }}-output
+          name: ${{ inputs.project }}-output-${{ inputs.version_type }}-${{ github.run_number }}
           path: |
             wrt/bin/targets/**
             !wrt/bin/targets/x86/64/packages/**
+            !wrt/bin/targets/**/packages/**
           if-no-files-found: warn
           compression-level: 6
           overwrite: false
+          retention-days: 30
 
-      - name: Upload build log
+      - name: Upload config diff
         uses: actions/upload-artifact@v4
+        if: steps.build.outputs.build_success == 'true'
         with:
-          name: ${{ inputs.project }}-build-log
+          name: ${{ inputs.project }}-config-diff
-          path: wrt/world_debug.log
+          path: |
+            wrt/.config
+            wrt/.config.before_oldconfig
+          if-no-files-found: ignore
+          retention-days: 7
+
+      - name: Cleanup
+        if: always()
+        run: |
+          echo "🧹 清理工作空间..."
+          cd wrt
+          make clean || true
+          echo "✅ 清理完成"

diy.sh

@@ -14,15 +14,67 @@ echo "🚀 添加自定义 feed 源..."
 
 echo "✅ feeds 添加完成"
 
+# 检测项目类型（OpenWrt 或 ImmortalWrt）
+DETECT_TARGET_FILE="package/base-files/files/etc/openwrt_release"
+if [ -f "$DETECT_TARGET_FILE" ]; then
+  if grep -qi "immortalwrt" "$DETECT_TARGET_FILE"; then
+    TARGET_TYPE="ImmortalWrt"
+  elif grep -qi "openwrt" "$DETECT_TARGET_FILE"; then
+    TARGET_TYPE="OpenWrt"
+  else
+    TARGET_TYPE="OpenWrt"
+  fi
+else
+  # 如果检测文件不存在，通过其他方式判断
+  if [ -d "feeds/packages" ]; then
+    TARGET_TYPE="ImmortalWrt"
+  else
+    TARGET_TYPE="OpenWrt"
+  fi
+fi
+
+echo "📋 检测到目标类型：$TARGET_TYPE"
+
 # 1. 默认 hostname
-sed -i "s/ImmortalWrt/Dwrt/g" package/base-files/files/bin/config_generate
+CONFIG_GEN_FILE="package/base-files/files/bin/config_generate"
+if [ -f "$CONFIG_GEN_FILE" ]; then
+  if [ "$TARGET_TYPE" = "ImmortalWrt" ]; then
+    sed -i "s/ImmortalWrt/Dwrt/g" "$CONFIG_GEN_FILE"
+  else
+    sed -i "s/OpenWrt/Dwrt/g" "$CONFIG_GEN_FILE"
+  fi
+  echo "✅ Hostname 已修改为 Dwrt"
+else
+  echo "⚠️  $CONFIG_GEN_FILE 不存在，跳过 hostname 修改"
+fi
 
 # 2. 默认 IP 地址
-sed -i 's/192.168.2.1/192.168.1.1/' package/base-files/files/bin/config_generate
+if [ -f "$CONFIG_GEN_FILE" ]; then
+  if grep -q "192.168.2.1" "$CONFIG_GEN_FILE"; then
+    sed -i 's/192.168.2.1/192.168.1.1/' "$CONFIG_GEN_FILE"
+    echo "✅ 默认 IP 已修改为 192.168.1.1"
+  elif grep -q "192.168.1.1" "$CONFIG_GEN_FILE"; then
+    echo "✅ 默认 IP 已经是 192.168.1.1"
+  else
+    echo "⚠️  $CONFIG_GEN_FILE 中未找到默认 IP 地址"
+  fi
+fi
 
 # 3. 默认 root 密码
+SHADOW_FILE="package/base-files/files/etc/shadow"
+if [ -f "$SHADOW_FILE" ]; then
   HASH=$(openssl passwd -1 'password')
-sed -i "s|root::0:0:99999|root:${HASH}:0:0:99999|" package/base-files/files/etc/shadow
+  if grep -q "^root::" "$SHADOW_FILE"; then
+    sed -i "s|root::0:0:99999|root:${HASH}:0:0:99999|" "$SHADOW_FILE"
+    echo "✅ root 密码已设置"
+  elif grep -q "^root:" "$SHADOW_FILE"; then
+    echo "⚠️  root 账户已设置密码，跳过"
+  else
+    echo "⚠️  $SHADOW_FILE 中未找到 root 账户"
+  fi
+else
+  echo "⚠️  $SHADOW_FILE 不存在，跳过 root 密码设置"
+fi
 
 # 4. 设置默认 LuCI 主题为 argon
 mkdir -p package/base-files/files/etc/uci-defaults
@@ -31,6 +83,7 @@ uci set luci.main.mediaurlbase=/luci-static/argon
 uci commit luci
 EOF
 chmod +x package/base-files/files/etc/uci-defaults/99_set_theme
+echo "✅ LuCI 主题已设置为 argon"
 
 # 5. 默认加载 BBR 拥塞控制算法
 mkdir -p package/base-files/files/etc/sysctl.d
@@ -38,16 +91,28 @@ cat >package/base-files/files/etc/sysctl.d/99-bbr.conf <<'EOF'
 net.core.default_qdisc=fq_codel
 net.ipv4.tcp_congestion_control=bbr
 EOF
+echo "✅ BBR 拥塞控制算法已启用"
 
 # 6. 修改默认 shell 为 bash
-sed -i "s|/bin/ash|/bin/bash|g" package/base-files/files/etc/passwd
+PASSWD_FILE="package/base-files/files/etc/passwd"
-# 你需要在 .config 中确保包含 bash，例如：
+if [ -f "$PASSWD_FILE" ]; then
-# echo 'CONFIG_PACKAGE_bash=y' >> .config
+  if grep -q "/bin/ash" "$PASSWD_FILE"; then
+    sed -i "s|/bin/ash|/bin/bash|g" "$PASSWD_FILE"
+    echo "✅ 默认 shell 已修改为 bash"
+  elif grep -q "/bin/bash" "$PASSWD_FILE"; then
+    echo "✅ 默认 shell 已经是 bash"
+  else
+    echo "⚠️  $PASSWD_FILE 中未找到 ash 或 bash"
+  fi
+else
+  echo "⚠️  $PASSWD_FILE 不存在，跳过 shell 修改"
+fi
 
 # 7. 自定义 SSH 登录横幅
 mkdir -p package/base-files/files/etc
 if [ -f "scripts/custom-files/banner.txt" ]; then
   cp scripts/custom-files/banner.txt package/base-files/files/etc/banner
+  echo "✅ 使用自定义 banner"
 else
   cat >package/base-files/files/etc/banner <<'EOF'
 |   | _____   _____   ____________/  |______  |  |
@@ -57,6 +122,7 @@ else
           \/      \/             By Dich    \/
 -----------------------------------------------------
 EOF
+  echo "✅ 默认 banner 已设置"
 fi
 
 # 8. 自定义 LuCI 概览设备型号